DIY Adjustable Pegboard Shelf

DIY Adjustable Pegboard Shelf

shelfDIY Adjustable Pegboard Shelf

Supplies:
2 foot x 3 foot x 1/2 inch wood panel – $25
Pencil
Ruler
Power drill
1-inch wood hole saw – $11
Sanding sponge – $6
1-inch dowel – $10
Hand saw – $12
6 inch x 8 foot x 1 inch wood board – $22
1-inch copper tube straps – 5 for $4
½-inch screw – $0.50 each
Wall anchor – $3
4-inch screws – $8
Washers – $5 for a pack

Instructions:
Wood Panel
1. For the 2 foot side, draw vertical lines at the 4 inch, 12 inch, and 20 inch. For 3 foot side, draw horizontal lines at 4 inch, 13 ½ inch, 22 ¾ inch, and 32 inch. Predrill holes at the intersections.

2. Use 1-inch hole saw to drill halfway. Flip over board, complete drilling.

Pegs
3. Saw dowel to 7-inch pieces.
Shelf

4. Saw wood board to 12 inch or 20 inch pieces, depending on preference.

5. For 12 in piece, screw 1-inch tube straps 8 inch apart. For 20 inch piece, screw 1-inch tube straps 16 inch apart.

Mounting
6. Predrill holes onto the corner of wood panel. Screw 4-inch screw through predrilled hole. Stack 1-inch length of washers on screw.

7. Predrill holes in wall. Mount wood panel to wall with wall anchor.

Note: Many home improvement stores will cut wood for free.